Guides

Vauxhall Key Fob Re-sync Guide

1. Switch on the ignition, system will then remain in the synchronising mode for 30 seconds.
2. Press and hold either the Lock or Unlock button for a few seconds.
3. Remove the key and test remote functions.

Nissan Key Fob Re-sync Guide

A maximum of four remote controls are allowed to be programmed. Before starting, please ensure all the doors have been unlocked

1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds.
2. Then turn the ignition switch to the OFF position. Remove the key from the ignition switch.
3. After 2 seconds, the system will enter programming mode and will flash the warning lights twice.
4. Press and HOLD the unlock button on the Plip.
5. While pressing the unlock button, press the lock button 3 times.
6. Release the unlock button.
7. The warning lights will flash once to indicate successful programming.
8. Repeat procedures 4 to 7 for up to 4 plip keys.
9. When completed turn the ignition ON, and the warning lights will flash 2 times.
10. Remove the key, and check all plip keys for operation.

NOTE: The programming mode will stop when either the ignition is switched ON, 4 plip keys have been programmed, or no input signal either from the switch or plip keys has been received for 120 seconds.

BMW Key Fob Re-sync Guide

Please ensure all doors and windows are closed before starting the procedure

1. Turn the key to position 1 (ignition lights) five times very quickly.
2. Remove key.
3. Hold the unlock button then press the lock button 3 times, and release the unlock button.
4. If you have another key do the same button pressing within 30 seconds.
5. While pressing the unlock button, press the lock button 3 times.
6. Turn on the ignition to finalise.